FREE FREIGHT - Online Orders over $100 - LIMITED EXCLUSIONS
{"id":4284266369,"title":"(5193) 100879 FLOW SWITCH TMT, PILOT, 12 GPM","handle":"100879-tmt-flow-switch-pilot-12gpm","description":"\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eMicro switch technology eliminates reed switch\u003c\/li\u003e\n\u003cli\u003eHighpressure inline flow switch\u003c\/li\u003e\n\u003cli\u003eActivates with as little as .5 gpm flow\u003c\/li\u003e\n\u003cli\u003eMinimal pressure drop up to 12 gpm\u003c\/li\u003e\n\u003cli\u003eMount in vertical position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4000 PSI operating pressure\u003c\/li\u003e\n\u003cli\u003e12 GPM maximum flow\u003c\/li\u003e\n\u003cli\u003e40-180 F operating temperature\u003c\/li\u003e\n\u003cli\u003eLead length: 48\" 18awg\u003c\/li\u003e\n\u003cli\u003e250 VAC switching voltage maximum\u003c\/li\u003e\n\u003cli\u003e5 Amps switching current maximum\u003c\/li\u003e\n\u003cli\u003e30 OHM contact resistance with leads\u003c\/li\u003e\n\u003cli\u003e200,000 operations electrical service life\u003c\/li\u003e\n\u003cli\u003e10 million operations mechanical service life\u003c\/li\u003e\n\u003cli\u003eInlet: 3\/8\" FPT\u003c\/li\u003e\n\u003cli\u003eDischarge: 3\/8\" FPT\u003c\/li\u003e\n\u003cli\u003ePilot: 1\/4\" hose barb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the flow switch \u003cstrong\u003eVERTICALLY\u003c\/strong\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eto the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1\/4\" hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1\/4\" ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e","published_at":"2016-02-24T10:51:00-05:00","created_at":"2016-02-24T10:51:23-05:00","vendor":"General Pump","type":"Switches","tags":["12 gpm","flow switch","gainesville georgia","power wash equipment","pressure wash equipment"],"price":12243,"price_min":12243,"price_max":12243,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":12273841473,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"5193","requires_shipping":true,"taxable":false,"featured_image":null,"available":true,"name":"(5193) 100879 FLOW SWITCH TMT, PILOT, 12 GPM","public_title":null,"options":["Default Title"],"price":12243,"weight":454,"compare_at_price":null,"inventory_quantity":1,"inventory_management":null,"inventory_policy":"deny","barcode":""}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/1183\/1612\/products\/tmt-pilot-switch.jpeg?v=1489015518"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/1183\/1612\/products\/tmt-pilot-switch.jpeg?v=1489015518","options":["Title"],"content":"\u003cstrong\u003eFEATURES:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\n\u003cul\u003e\n\u003cli\u003eMicro switch technology eliminates reed switch\u003c\/li\u003e\n\u003cli\u003eHighpressure inline flow switch\u003c\/li\u003e\n\u003cli\u003eActivates with as little as .5 gpm flow\u003c\/li\u003e\n\u003cli\u003eMinimal pressure drop up to 12 gpm\u003c\/li\u003e\n\u003cli\u003eMount in vertical position\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSPECIFICATIONS:\u003c\/strong\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4000 PSI operating pressure\u003c\/li\u003e\n\u003cli\u003e12 GPM maximum flow\u003c\/li\u003e\n\u003cli\u003e40-180 F operating temperature\u003c\/li\u003e\n\u003cli\u003eLead length: 48\" 18awg\u003c\/li\u003e\n\u003cli\u003e250 VAC switching voltage maximum\u003c\/li\u003e\n\u003cli\u003e5 Amps switching current maximum\u003c\/li\u003e\n\u003cli\u003e30 OHM contact resistance with leads\u003c\/li\u003e\n\u003cli\u003e200,000 operations electrical service life\u003c\/li\u003e\n\u003cli\u003e10 million operations mechanical service life\u003c\/li\u003e\n\u003cli\u003eInlet: 3\/8\" FPT\u003c\/li\u003e\n\u003cli\u003eDischarge: 3\/8\" FPT\u003c\/li\u003e\n\u003cli\u003ePilot: 1\/4\" hose barb\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstall the flow switch \u003cstrong\u003eVERTICALLY\u003c\/strong\u003e\u003cspan class=\"Apple-converted-space\"\u003e \u003c\/span\u003eto the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1\/4\" hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1\/4\" ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e \u003c\/p\u003e"}

(5193) 100879 FLOW SWITCH TMT, PILOT, 12 GPM

Product Description
FEATURES:
  • Micro switch technology eliminates reed switch
  • Highpressure inline flow switch
  • Activates with as little as .5 gpm flow
  • Minimal pressure drop up to 12 gpm
  • Mount in vertical position

SPECIFICATIONS:

  • 4000 PSI operating pressure
  • 12 GPM maximum flow
  • 40-180 F operating temperature
  • Lead length: 48" 18awg
  • 250 VAC switching voltage maximum
  • 5 Amps switching current maximum
  • 30 OHM contact resistance with leads
  • 200,000 operations electrical service life
  • 10 million operations mechanical service life
  • Inlet: 3/8" FPT
  • Discharge: 3/8" FPT
  • Pilot: 1/4" hose barb

 

  • Install the flow switch VERTICALLY to the output side of the unloader, with the 2 conductor lead wires exiting from the top. If your system uses a downstream chemical injector, it should be mounted on the output side of the flow switch. Pilot model requires a direct connection to the water supply feed line to provide a pilot signal. This is accomplished by installing a tee fitting (with a 1/4" hose barb fitting) directly in the water supply feed line. The tube must be installed before the float valve. Install an appropriate length of 1/4" ID reinforced polyvinyl tubing between the tee fitting and the valve pilot port.

 

$ 122.43
Maximum quantity available reached.